shop new - Truncated Dome Pros

Ramp Up (Glue Down)

sitemaster — Thu, 27 Dec 2018 09:30:13 +0000

Ramp Up is a pre-finished ADA compliant sidewalk ramp mat that installs in less than fifteen minutes. It is surface applied, but when complete it will give the look of a cast in place tile on your street corner.

Ramp-Up offers you a quick and easy installation. First, you center your pre-finished mat, tape the perimeter, trowel down the SSTDRU859 adhesive, replace the mat in the wet adhesive and float up the edges and seams to form a watertight seal. Pull your tape and you are done!

Ramp Up still offers you the same low profile and zero trip point as our Traditional system offers, except now it can be installed in less than half the time. There are no mechanical fasteners or anchors needed to secure Ramp Up. There is no need to demo and re-pour existing curb ramps to accommodate your ADA truncated dome requirements.

The post Ramp Up (Glue Down) appeared first on Truncated Dome Pros.

EquaLite Built UP

sitemaster — Thu, 27 Dec 2018 08:37:21 +0000

EQUALITE

Built Up is a Peel ‘n Stick mat that is easy and quick to install. Installs in minutes and requires no special tools. No drilling or anchoring is required.

MEETS ALL ADA REQUIREMENTS

The Built Up system is an ADA compliant patterned mat with a high contrast, low profile, slip-resistant surface. All ADA guidelines for ADAAG section 4.29.2 ADA compliant truncated-done tactile warning system for pavement are met.

PERFECT FOR ASPHALT APPLICATIONS

The adhesive used in Built Up is ultra-strong, heavy-duty and long-lasting. It is secure and fast and will stick to anything. Space age technology makes the mat weather, UV, water and temperature-resistant.

INSTALLS IN MINUTES

Save time and money when it comes to installation. Easily installed by one person with minimal preparation required. If you’re currently sending out a crew to install ADA mats you are wasting money. Start saving money today with the easy to install Built Up ADA surface mount mat.

The post EquaLite Built UP appeared first on Truncated Dome Pros.

Peel-And-Stick HC Sign

sitemaster — Thu, 27 Dec 2018 06:48:38 +0000

Peel ‘n Stick TECHNOLOGY is now

available for handicap parking stall mats.

POWERBOND is the ADA approved parking stall mat that is both easy and quick to install. Due to its proprietary peel ‘n stick technology, the mats take just minutes to install and require no special tools. With POWERBOND, there is NO painting, NO drilling, NO anchoring and NO extended traffic lane closures.

BONDS TO ASPHALT AND CONCRETE

The adhesive used in the POWERBOND parking stall mats is ultra-strong, heavy-duty and long-lasting. It is secure and fast and will stick to both asphalt and concrete. Space-aged technology makes the mat weather, UV, water and temperature-resistant.

INSTALLS IN MINUTES

Save time and money when it comes to installation. POWERBOND is easily installed by just one person with minimal preparation required. If you are currently sending out a crew to paint and mark handicap parking spots, let us save you time and money. Start lowering your labor costs today with the easy to install POWERBOND ADA accessible, handicap parking stall mat.

Size 36″x36″

Weight 13 lb

Color: Royal Blue and White

The post Peel-And-Stick HC Sign appeared first on Truncated Dome Pros.

Cast-in-Place

sitemaster — Thu, 27 Dec 2018 02:18:15 +0000

The Cast-in-Place panel is a great long-term solution for any project or climate. Made with a durable exterior homogenous glass, carbon, and fiberglass reinforced composite material; the thick, heavy panel and sturdy embedment ribs ensure a strong bond and superior structural support.

For use in new curb ramps or new construction

Pressed into place in freshly poured concrete

Cast-In-Place Tiles have a 1/4″ nominal thickness and feature embedment ribs 3″ on center through entire length of tile

Plastic sheeting protection covers entire surface of Cast-In-Place Tile

Standard sizes: 24″ x 36″, 24″ x 48″, 24″ x 60″, 36″ x 48″, and 36″ x 60″

Features and Advantages:

Raised truncated domes with a diameter of nominal 0.9” and a height of 0.2”

Body Thickness is 0.25” not including truncated domes

Does not rely on any type of paint coating to achieve color stability

The Cast in Place Tactile Surface is made of a colorfast and UV stable homogenous glass and carbon composite with fiberglass truncated domes for enhanced durability. The Cast in Place Tactile Surface is used for new curb ramps or new construction applications and is a great long-term solution for any project, under any weather conditions.

All of our truncated dome tactile surfaces are in full compliance with the American Disabilities Act Accessibility Guidelines (ADAAG), Public Right-of-Way (PROW), and California Title 24 Requirements. ADA Solutions Inc. products are approved for use by all major municipalities, DPWs, and state DOTs.

The post Cast-in-Place appeared first on Truncated Dome Pros.